Motorcycle handlebar risers can improve the riding experience for both men and women. They provide a good combination of comfort and performance. A mid-rise handlebar offers a good compromise between performance and comfort. This type of riser can be installed on any bike and is compatible with the stock height of most bars. Its installation process is simple and involves just removing the stock handlebar, installing the motorcycle handlebar risers, and putting it back on the bike.
Handlebar Riser – How It Works
Bar risers are a little metal device that raises the handlebar a little higher off the ground, bringing it closer or farther away from the rider depending on their needs.
Bar risers are installed on the spot after unscrewing the handlebar. To give rise, a bar riser is installed in lieu of the handlebar. The handlebar is next installed on the riser and secured with screws and bolts.
All you have to do now is place the bar risers where the handles have been placed. After removing your stock handlebar, insert the risers in its place, then replace the stock handlebar on the risers, alter as needed, and further tighten the bolt.
Use of Handlebar Risers
The most common use for handlebar risers is to reduce body pain caused by sitting too far back on the bike. They raise the handlebars a few millimeters, which makes it more comfortable for the rider’s posture. Unlike regular bars, these risers do not require changing control cables or adjusting the seat. Moreover, they do not alter the center of gravity of the bike, which means that they can be used on any model of motorcycle.
Depending on the height of the motorcycle, different types of risers offer different benefits. Universal ones are best if you want to get a better seating position on your motorcycle, while bike-specific ones will improve your comfort and safety. Both kinds of motorcycle handlebar risers are available online. If you’re planning to buy a riser, make sure it’s compatible with the bike’s stock height. The best way to know which size is right for your motorcycle is to test it first and see which one works best.
Benefits of Handlebar Risers
Adding a handlebar riser to your motorcycle is an easy way to adjust the height of your riding position and reduce your body pain. Using risers, you can adjust the angle and height of the handlebar, reducing stress on your arms and back. Moreover, risers secure the handlebars to the front end.
Risers can either lift the handlebars or pull them away from the rider, depending on the desired position. They also make the seating position more comfortable. Most risers are adjustable from 10 to 40 millimeters. Because of the variation in height between different riders, motorcycle handlebars often don’t fit comfortably.
The risers can be adjustable, clip-on or custom made to fit your bike. Adjustable risers fit between the stock handlebar and perch. Some motorcycle handlebars may require modifications, such as rerouting of lines. Adjustable risers can also adjust fore-and-aft and height. Risers are useful when you need to change your riding position frequently.
The ergonomic position of a rider is important for long-term comfort and control. Riding a motorcycle without a proper handlebar riser can lead to fatigue and aching muscles. The riser can also reduce the risk of neck, shoulder, and wrist aches. Motorcycle handlebar risers are a great way to adjust the position of your motorcycle. There are several different styles of handlebar risers, including the one with the most comfort and adjustability.
While flat bars do offer no disadvantages, they can create pain on long rides, and the forward weight is inhibiting pulling the front wheel up. Risers help to alleviate these problems by bringing the handlebars closer to the rider’s elbows. Aside from ergonomic benefits, they can also improve your riding position. If you’re short, you might find it difficult to increase the height of your handlebars without additional support.
Motorcycle Handlebar Size
Here’s what you’ll need if you want to stand with your back straight when powder or ditch riding: The 5′ riser will suffice if you are under 5′-10’′ tall. If you’re above 6 feet tall, the 6 inch mark is quite near. Stock is 4′′, and if you go higher than that, your arms would feel too high while sitting.
Motorcycle Handlebar Risers Buying Guide
Motorcycle handlebar risers can enhance the comfort of your riding experience. Choosing the right type of risers depends on the style of your motorcycle and its overall size. Some risers have more than two inches of height while others only have one or two inches of height. For optimal performance and comfort, choose a mid-rise riser. These risers are a compromise between performance and comfort.
To find the right height of your riser, first measure the height of your existing handlebar. Then measure the free cable length from the switch housing to the riser. Compare this length to the Handlebar dimensions, which are located at the bottom right corner of the dimension sheet. Generally, you will want to add about two inches if your bars are curved. Remember to allow for a few inches of cable length when choosing a riser to fit your motorcycle’s height.
Choose a bar that is two inches higher than the bar’s existing height. For example, if you have a 22mm handlebar, choose a riser with a two-inch height. A three or four-inch riser will be sufficient for your motorcycle. You can also select risers that will fit cruisers with one-inch handlebars. A good choice for this purpose is the Mini Ape Hanger, which is only 8-to-10 inches high. Its high rise does not affect the bike’s overall height, but it does provide better handling.
Once you’ve decided on the type of motorcycle handlebar risers, you need to adjust the top clamp to match it. The gap between the two should be equal on both sides. The top clamp and riser bolts should be torqued to 30 or 40 ft-lbs. Make sure you use the correct torque specs, otherwise, the risers could spin on the bike. Then, if you’ve chosen a riser with a small gap between the top clamp and the handlebar, you’ll end up with a looser top clamp.
Are Motorcycle Bar Risers Universal?
They either can be Universal or Bike-Specific. Bike-specific or Universal, whatever they are, the risers provide for a more relaxed seating position and increased comfort. Universal bar risers come in silver or black and include height adjustments ranging from 15 to 50 mm.
How to Measure Handlebar Risers?
Having the proper height for your handlebars is a critical aspect of selecting the right set of bars. Handlebar riser styles can affect the height of your bars. To determine the correct riser length, you should first measure the height of the bottom of the top portion of your handlebars. Some manufacturers use different terms to refer to this height measurement, such as the knurl width or the end rise.
You need to know the diameter of your stock handlebar before purchasing and installing handlebar risers. You can use a 2 x 4 board or other object to measure the height. In most cases, a 2 inch riser will be sufficient. However, if your handlebars are too narrow or too wide, you may have to purchase a shorter riser or replace the cable. Listed below are some simple measurements for handlebar risers.
Using a tape measure is the most accurate way to determine the length of your handlebars. It is easy to make an accurate measurement by measuring the distance from your handlebars to the top clamp. Once you have this information, you can select the proper riser for your bike. Just make sure to check the instructions carefully. You’ll be glad you did. Just follow the tips in this article to choose the right handlebar risers for your needs.
After determining the length of the handlebars, you can start the process of modifying your bike. First, sit in your garage with your hands in a fist position. Then, lift your arms to the height of your desired position. Note the distance from your hands to your bike risers. Then, make sure the position of your hands on the handlebars is comfortable. Depending on the height of your handlebar risers, this distance may be as high as 15mm or as low as 0.50 inch.
Are Handle Bar Risers Safe?
Before you install a handlebar riser, it’s important to understand what makes them safe. Generally, handlebar risers are made of a sturdy material that will not break, so they won’t hurt you or your bike. However, you should also consider the size of your handlebar risers. While they’re generally safe, you should never overextend them as this can interfere with your center of gravity.
Do Bar Risers Affect Handling?
Handlebars are designed to maintain the motorcycle’s geometry in accurate place during rides. As a result, bar risers affect handling because their relationship directly affects mass distribution with the motorcycle, even if you don’t see it.
Because of the shift in center of gravity, motorcycle bar risers have an impact on handling. You can modify the handlebar in one of two ways: you can reduce it or elevate it. The center of gravity altered in both cases, affecting the ride and handling.
The handling of your motorcycle is affected as you raise or reduce the handlebar height. For example, if the handlebar on your motorcycle is lower, you will have to lean forward to ride, which lowers your center of gravity.
How Do I Know My Handlebar Needs a Riser?
The best approach to find out if they’re right for you is to give them a shot. Risers will help you if you’re leaning forward or down too much with your shoulders hunched and find it hard to ride that way even for short distances.
Pull Back Risers?
Pull back risers are extensions for your handlebars. They raise the bike’s handlebars an inch or more, allowing you to adjust the amount of pull back on the handlebars. These risers are available in chrome or gloss black powdercoat and include hidden mounting hardware. If you’re unsure whether you’ll need pull back risers, we’ll take a look at their benefits and how they work.
Murdock pull back risers are available in eight, ten, and twelve-inch heights. They feature machined recesses for wiring and come with a 1/2″ hole for wires. They’re made from aircraft-grade aluminum, and come with 12pt stainless or black chromoly bolts. These are compatible with most H-D triple trees that have removable bar clamps. When choosing the right pull back riser, make sure to check the manufacturer’s warranty.
Last update on 2022-06-20 / Images from Amazon Product Advertising API
Leave a Reply