Motorcycle gear indicator

A motorcycle gear indicator is a gadget that shows the gear ratio. This is computed from the turning speed of the rear wheel and the engine revs. The device is easy to install and requires only three wires. Most of them feature a miniature display panel that is one of the smallest in the market. You can install one on any model of motorcycle, as long as it is wired properly. The device also features a built-in sensor that automatically adjusts the brightness.

The most common type of motorcycle gear indicator is the hard-wired type. These can be installed by breaking a wired buckle but are not reliable. A more convenient and reliable type is a Plug-and-play motorcycle gear indicator, which simply inserts into the existing buckle. They are inexpensive but may be a bit overpriced. Some customers prefer a wireless model. However, they should know that they cannot use a wired gear indicator while riding.

Another type is a universal model that fits any motorcycle. Its operation depends on the movement of the gear shift lever, which is impossible to perform on older models. Commercial models often require sensors, but they are difficult to install on older motorcycles. A universal gear indicator consists of a seven-segment LED indicator and two Hall sensors on the frame of the bike. A small magnet is placed on the gear shift lever to signal the shift position.

Bestseller No. 1
ATFWEL Motorcycle Gear Indicator for Kawasaki with Holder Bracket,Waterproof LED Display Digital Display Speedometer Shift Lever Sensors Plug & Play (Blue)
  • 【Plug and Play&Easy Installation】This LED gear indicator is plug and play. With reserved socket to quick connect , no need cut lines.Paste the gear indicator shift around dashboard with double-sided adhesive tape .Or fix this gear indicator holder on the handle and then attached to the gear indicator.With no wiring modifications required,very easy to install.
  • 【Universal Holder Bracket】This gear indicator comes with holder fit for most motorcycles with a handlebar diameter from 22mm to 26mm.This gear indicator holder built-in screw with washer for secure attachment to the handle
  • 【Durable & No Damage】This Gear Indicator is made of high quality plastic, waterproof and resistant to high and low temperature.It reads only ECU data of motorcycle, won't cause any damage.Gears will display correct once the engine working and clutch released.Wrong gear selection will causes a setback, affecting comfort and even damaging the gearbox.
  • 【Super Waterproof & Convenient】This motorcycle gear indicator is waterproof,even soaked in water would be fine.LED display is very convenient for you while driving day and light.
  • 【Best Service Guarantee】Professional, premium aftersale Service.If you don't know which model suit your motorcycle, where to install,or purchage wrong model,Pls feel free to contact us!
Bestseller No. 2
ATFWEL Motorcycle Gear Indicator for Honda with Holder Bracket,Waterproof LED Display Digital Display Speedometer Shift Lever Sensors Plug & Play (Red)
  • 【Plug and Play&Easy Installation】This LED gear indicator is plug and play. With reserved socket to quick connect , no need cut lines.Paste the gear indicator shift around dashboard with double-sided adhesive tape .Or fix this gear indicator holder on the handle and then attached to the gear indicator.With no wiring modifications required,very easy to install.
  • 【Universal Holder Bracket】This gear indicator comes with holder fit for most motorcycles with a handlebar diameter from 22mm to 26mm.This gear indicator holder built-in screw with washer for secure attachment to the handle.
  • 【Durable & No Damage】This Gear Indicator is made of high quality plastic, waterproof and resistant to high and low temperature.It reads only ECU data of motorcycle, won't cause any damage.Gears will display correct once the engine working and clutch released.Wrong gear selection will causes a setback, affecting comfort and even damaging the gearbox.
  • 【Super Waterproof & Convenient】This motorcycle gear indicator is waterproof,even soaked in water would be fine.LED display is very convenient for you while driving day and light.
  • 【Best Service Guarantee】Professional, premium aftersale Service.If you don't know which model suit your motorcycle, where to install,or purchage wrong model,Pls feel free to contact us!
Bestseller No. 3
Motorcycle Gear Indicator for Honda CBR CB500X CB400SF CB650F CB1300 CBR600RR CB1000R Cb650r VFR800 Digital Meter LED Display Waterproof ECU Plug (White)
  • -【Plug and play】: This LED gear indicator uses an ECU plug, which can be installed by connecting it to the originally reserved ECU socket of the motorcycle without cutting the wire.
  • -【Non-destructive installation】: only read the motorcycle ECU data, and will not cause other damage to the motorcycle. The gear display shows up to 6 Levels. Once the engine is working and the clutch is released, the gear position will be displayed normally.
  • -【Super Waterproof】: This LED gear display is waterproof, so you don't need to worry about it even on rainy days.
  • -【LED display】: Bright but Gentle, allowing you to clearly see the gear display regardless of whether it is in the sun or at night, avoiding damage to the motorcycle caused by the wrong gear.
  • -【After-sales service】: Please confirm whether your model is suitable before shopping. If you do not know whether your motorcycle is suitable, or if you are not sure about the installation process after purchase, do not hesitate and contact us immediately.
Bestseller No. 4
Idea Waterproof Motorcycle Gear Indicator LED Display for Yamaha (Blue)
  • Easy Installation: Original motorcycle with reserved socket for quick connection, other wires need connect according the instructions,No need cut lines.Paste it around dashboard with double-sided adhesive tape
  • Super Waterproof: This motorcycle LED gear indicator is waterproof,even soaked in water would be fine.So don't be afraid of rainy days.
  • No Damage: This Gear Indicator reads only ECU data of motorcycle , won't cause any damage, gears will display once the engine working and clutch released.
  • Perfect for Riding: Regardless of novice or veteran,wrong gear selection will causes a setback, affecting comfort and even damaging the gearbox.
  • Best Aftersale Service: If you don't know which model suit your motorcycle, where to install,or purchage wrong model,Pls feel free to contact us!
Bestseller No. 5
Idea Waterproof Motorcycle Gear Indicator LED Display Plug & Play for Honda fits CB400 SF/SB CBR500RR XL125V Varadero CBR250 Stateline
  • Plug and Play: This LED gear indicator is plug and play.Original motorcycle with reserved socket for quick connection, no need cut lines
  • Easy Installation: It is easy to install.Paste the gear indicator shift around dashboard with double-sided adhesive tape
  • Super Waterproof: This motorcycle LED gear indicator is waterproof,even soaked in water would be fine.So don't be afraid of rainy days
  • No Damage: This Gear Indicator reads only ECU data of motorcycle, won't cause any damage.gears will display once the engine working and clutch released
  • Best Aftersale Service: If you don't know which model suit your motorcycle, where to install,or purchage wrong model,Pls feel free to contact us!
SaleBestseller No. 6
Genuine Kawasaki Accessories Gear Position Indicator for 15-16 Kawasaki EN650SA
  • Since Kawasaki Heavy Industries, Ltd.
  • (KHI), built its first motorcycle in 1953, they've never stopped pushing technology to arm riders with what they need to dominate the streets.
  • Advanced engineering, exhaustive testing, and tireless passion go into every motorcycle every time rubber hits the road.
  • From industry-first features to the features that have evolved over a long history, KHI's innovations will never stop feeding the insatiable appetites of riders around the world.LED digital gauge provides clear visual gear indication with a seamless l
  • Genuine Kawasaki Accessories P/N: 99994-0540.
Bestseller No. 7
Acouto Gear Indicator Motorcycle Modified Display Speedometer LED Digital Shift Lever Sensors Digital Gear Indicator for Kawasaki ER-6F 2012-2017 KLE650 2010-2017 for Ninja 300 2013-2018( Green)
  • LED Digital Dispaly---- The motorcycle gear indicator shows the current gear number and monitors the driving dynamics at all times. The gear indicator is professionally manufactured with accurate monitoring data, stable performance and high reliability
  • 1 to 6 Gear---- The motorcycle gear indicator represents the current gear from 1 to a maximum of 6 and a neutral indicator. The illuminated display will automatically dim at night to help you move forward at night
  • Quickly Detect Current Gear Position---- The motorcycle gear indicator detects the current gear position faster than other gear indicators that use speedometers and tachometer signals. The motorcycle gear indicator is easy to install, plug and play
  • Applicable Models---- This motorcycle gear indicator is suitable for Kawasaki ER-6F ER-6N 2012-2017, for Kawasaki Ninja 300 2013-2018, for Kawasaki VN900 2011-2015, for Kawasaki Z300 2015-2016, etc. 100% brand new, please be assured of your purchase
  • Quality Assurance---- This motorcycle gear indicator kit includes 1 * Gear Indicator, 3 * Cable Tie, 2 * Sticker and 1 * Connector. Every product has passed the quality inspection before leaving the factory. Please confirm whether the product is suitable before purchasing
Bestseller No. 8
IDEA Waterproof Motorcycle Gear Indicator Plug & play LED Display for Kawasaki (rectangle, Blue)
  • Plug and Play: This LED gear indicator is plug and play.Original motorcycle with reserved socket for quick connection, no need cut lines
  • Easy Installation: It is easy to install.Paste the gear indicator shift around dashboard with double-sided adhesive tape
  • Super Waterproof: This motorcycle LED gear indicator is waterproof,even soaked in water would be fine.So don't be afraid of rainy days
  • No Damage: This Gear Indicator reads only ECU data of motorcycle, won't cause any damage.gears will display once the engine working and clutch released
  • Best Aftersale Service: If you don't know which model suit your motorcycle, where to install,or purchage wrong model,Pls feel free to contact us!
Bestseller No. 9
ATFWEL Motorcycle Gear Indicator for Yamaha with Holder Bracket,Waterproof LED Display Digital Display Speedometer Shift Lever Sensors (Red)
  • 【Universal Holder Bracket】This gear indicator comes with holder fit for most motorcycles with a handlebar diameter from 22mm to 26mm.This gear indicator holder built-in screw with washer for secure attachment to the handle.
  • 【Easy Installation】With reserved socket to connect , and other wires need connect according the instructions.no need cut lines.Paste the gear indicator shift around dashboard with double-sided adhesive tape .Or fix this gear indicator holder on the handle and then attached to the gear indicator.
  • 【Durable & No Damage】This Gear Indicator is made of high quality plastic, waterproof and resistant to high and low temperature.It reads only ECU data of motorcycle, won't cause any damage.Gears will display correct once the engine working and clutch released.Wrong gear selection will causes a setback, affecting comfort and even damaging the gearbox.
  • 【Super Waterproof & Convenient】This motorcycle gear indicator is waterproof,even soaked in water would be fine.LED display is very convenient for you while driving day and light.
  • 【Best Service Guarantee】Professional, premium aftersale Service.If you don't know which model suit your motorcycle, where to install,or purchage wrong model,Pls feel free to contact us!
Bestseller No. 10
Motorcycle Gear Indicator Holder fit 22mm-28.6mm, Keenso Universal Speed Gear Display Indicator Holder Bracket
  • ☆【Universal Gear Indicator Holder】~ Universal fit for most motorcycle with a handlebar diameter from 22mm to 28.6mm.
  • ☆【Practical & Convenient】~ Universal speed gear display support bracket helps to make a convenience for you to relocate your speed gear display. Allows to mount the gear indicator at eye level to make them can be easily viewed
  • ☆【Solid Aluminum Alloy Made】~The motorcycle Gear Display Indicator Holder is fully machined from solid aluminum, sturdy body, corrosion resistance, durable for long time service.
  • ☆【Quick to Install】~ Very easy to install, Universal for Motorcycle with 22- 28.6mm Handlebar Mount, meets the standard on the market. With no wiring modifications required, time and money saving.
  • ☆【Keenso Quality】~ 100% test before shipping, fast money refund & perfect customer service! Our Speed Gear Display Holder Bracket Not included the Motorcycle LED Gear Indicator.

Last update on 2022-05-12  / Images from Amazon Product Advertising API

About the author

Writer @ Motorcycleall.

Leave a Comment