Clutch cable lube -Motorcycleall Rating

Crankshaft and clutch cables are usually held by a brass plate that catches grit in between them. To lubricate the cables, you need to carefully unscrew the bracket and allow the throttle cable to slide out of it. Then, lubricate it with a special tool. Once you’ve finished, wrap the cable in cloth to prevent any lube from spilling. To reassemble the lever, follow the same steps, but be careful with the white plunger in the clutch switch.

Bestseller No. 1
PJ1 1-12 Cable Lube - 11 Ounce
  • Cleans and lubes in one easy application
  • Smoother and more precise cable operation
  • Quickly penetrates to clean and lubricate
  • Extends the life of all wire type brake, throttle and clutch cables
  • Protects against rust and corrosion
Bestseller No. 2
Tusk Cable Luber with Champions Choice Cable Lube
  • Kit includes: Tusk Cable Luber and Champions Choice cable lube 6.25 oz.
  • Clamps over the cable and the housing.
  • Designed to be used with aerosol cable lube.
  • Effortlessly injects lubricant through the entire cable housing.
  • Champions Choice Cable Lube is an excellent cable lubricant that cleans, purges and lubricates in seconds. It leaves a non-drying, ultra-thin film that penetrates, lubricates, displaces moisture and prevents rust and corrosion.
Bestseller No. 3
Motion Pro Lubricant for All Control Cables 05098
  • Specially formulated with Teflon to make all cables work smoother and last longer
  • Does not contain any environmental hazardous CFC'&rsquos
  • Includes nozzle tube for pin-point accuracy
  • 6 oz. Spray can
Bestseller No. 4
Motion Pro 08-0182 Cable Luber
  • Used to inject lubricant into cable housing
  • Clamps over housing and wire allowing an aerosol can to be connected
  • Once lube runs out the far end the cable is lubricated
  • Ideal for use with Motion Pro cable lube
Bestseller No. 5
KiWAV Cable Lubricator Lubricant Luber Lube Oiler Tool Twin Clamp for Motorcycle ATV Dirtbike Scooter Bike
  • Hold and cover cable firmly by special rubber and two-screw tighten vise design.
  • Injecting the lubricant fluid into the cable housing very easily. Just put the straw of the lubricant into the injection hole and press the lubricant after tighten up the two screws.
  • Gently press and release the lubricant few times, the fluid will penetrate the whole cable and that will make the clutch action smoothly.
  • The metal cable will rust if it is not lubed. So always lubricate metal cables on your regular maintenance.
  • KiWAV cable lubricator is a must-have tool to keep your cable lubricated. Can efficiently apply lubricator to the cable
Bestseller No. 6
Protect All Cable Life - Cable Lubricator for Bicycles/Motorcycles/Boats/Jetskis/ATVs/Snowmobiles 25006
  • [VERSATILITY]: Protect All Cable Care Kit helps lubricate cables on motorcycles, boats, jet skis, ATVs, snowmobiles, bicycles and much more
  • [FUNCTIONALITY]: Coats the cable with an ultra-thin film that displaces moisture and prevents rust and corrosion
  • [CONVENIENCE]: Cable Care Kit eliminates the need of removing the cable from the housing, thanks to Protect All Cable Luber
  • [UTILITY]: Works in high, humid temperatures to below 0 degrees Fahrenheit, preventing cables from freezing and snow and ice buildup
Bestseller No. 7
Motion Pro Cable Luber V3 Tool
  • Motion Pro 08-0609 Cable luber V3
  • Original Motion Pro design seals completely around cable housing
  • Works on most control cables with 4 mm to 8 mm OD housing
  • Adjustable plunger insures efficient use of cable lube / Easy to use and clean
  • Best if used with Motion Pro Cable Lube (15-0002), not included
Bestseller No. 8
2 Pieces Vehicle Cable Lubricator Alloy Cable Lubricator Clutch Throttle Cable Lubricator Dual Oiler Cable Lube Tool for Motorcycles Bicycle Boat Bike Cable Lubrication
  • Simple to use: it is easy to use this vehicle cable lubricator to add the lubricant fluid into the bicycle’s cable housing ; Firstly you need to loose the 2 screws, then please put the straw of the lubricant into the hole and press the lubricant after tighten up the two screws, finally gently press and release the lubricant few times, the fluid will penetrate the whole cable and will make the clutch acts smoothly
  • Attractive design: the motorcycle cable is held and covered firmly by a foam sponge inside the dual oiler cable lube tool, which features a two-screw vise design, convenient for you to control the cable tightly; The vibrant yellow and blue colors look eye-catching and adorable, giving you a good and comfortable visual feeling
  • Reliable material: the lubricators are constructed with quality alloy material, their tough, sturdy and durable advantages ensure that you can use them for a long time; The metal cable will rust If it is not lubricated regularly, so it is important for you to buy these durable cable lubricating tools to help you to do this vital task easily and conveniently
  • Appropriate measurement: the dimension of clutch throttle cables lubricator measures approx. 1.57 inches/ 4 cm in length, 0.75 inches/ 1.9 cm in width, small and exquisite, suitable for most vehicle’ cables lubricant application and easy to store or carry in the toolbox, backpack, pocket and so on
  • Wide usage: the screws on the alloy lubricant tool are adjustable, which make the tool is suitable for most vehicles' cable lubrication, for example, motorcycles, bicycle, boat, bike, scooter, truck; The application of cable lubricator is an available and effective solution for lubricating your cables safely and minimizing mess
Bestseller No. 9
Pit Posse Universal Cable Luber Tool for Motorcycle ATV Dirt Bike Mx – – Good for Clutch and Throttle Cables – Automotive Tools
  • ✅ QUICK AND EASY WAY TO LUBE YOUR BIKE'S CORDS- Pit Posse's universal cable lubber is the best solution for lubricating your cables safely while minimizing any mess. This oiler tool is the best way to keep your clutch operating smoothly, freeing up rusty motorcycle throttle cables, keeping the cables lubricated properly and doing maintenance on your motorcycle regularly.
  • ✅ A CABLE LUBER WITH 2 SCREWS FOR OPTIMAL SEAL- Pit Posse's deluxe cable oiler has a twin set of screws giving a tight seal when lubricating. The double screw tightening design of this universal lubing device works best for forcing lube into the many different sizes and cable end types. The 2 screws help prevent leaks and unwanted mess.
  • ✅ MANUFACTURED FROM HIGH-QUALITY MATERIALS- The cable lubber is constructed with extruded billet aluminum and high-quality rubber components. Designed to easily clamp over housing and wire and allowing your aerosols to be connected directly. This lubricant tool for your cords is sturdy, durable, and will last. The perfect addition to your toolbox.
  • ✅ SAVE TIME AND MONEY LUBRICATING YOUR CABLES- Free up your cables and save money on buying a new cable, save time and aggravation when doing this vital task. The cable lubber will significantly cut down the time it takes to take out and lubricate any type of motorcycle cable and make this maintenance step so much easier & cleaner.
  • ✅ YOUR SATISFACTION IS OUR #1 PRIORITY- We take pride in manufacturing motorcycle parts that save you time and money while not compromising on quality. Your safety and performance are what matters most. If you have any questions or concerns about your product, please reach out to us and we would be happy to assist you.
Bestseller No. 10
Pj1 1-12 cable lube 11oz (1-12)
  • Powersport > CHEMICAL > Chemical Other > Cable Lube
  • You are Purchasing One 11oz Can.
  • PJ1 Cable Lube 1-12.
  • Cleans, lubes and extends cable life

Last update on 2022-05-12  / Images from Amazon Product Advertising API

About the author

Writer @ Motorcycleall.

Leave a Comment