Best harley clutch cable – Motorcycleall rating

Purchasing a Harley Clutch Cable may seem like a simple task. But, it isn’t that easy, and it’s important to know how to do it correctly to ensure a long lasting, high-quality product. Listed below are some tips to help you purchase a quality one. First, follow the directions in the service manual to adjust the cable properly. Once you’re done, tighten the lock nut to the proper position and test it out on a bike track.

To make adjustments to your Harley clutch cable, remove the side transmission cover. Depending on the motorcycle, you may need to replace the clutch cable assembly, gasket, and oil. You can also replace the clutch cable entry point with a small rubber o-ring, but if you’re lucky, you’ll be able to reuse the old one. If you have an older bike, you may also need to replace the throttle cables and idle cables.

To change the clutch cable, remove the side transmission cover. Replace the gasket and oil or fluid with new ones. A small rubber o-ring may be necessary for the entry point of the clutch cable. If the rubber o-ring is in good condition, you can reuse it. It’s not hard to replace the entire clutch cable. It will take about an hour to install. The process is simple, but the results can vary.

Bestseller No. 1
Motion Pro 66-0170 Stainless Braided +6" Clutch Cable for 1989-1999 Harley-Davidson Heritage Softail & Classic
  • This is a High Quality Stainless Steel Braided Replacement Clutch Cable for your Harley-Davidson.
  • Stainless Steel Braided Clutch Cables have a clear UV Resistant Armor Coat on the outside of the stainless steel braid to reduce fading from the Sun and to protect your paint from rubbing.
  • Clutch Cables have a protective inner sleeve for an easier pull and provide longer life.  Chrome plated ends provide the finishing touch.
  • This clutch cable housing length is 68 11/16" long.
  • Fits 1989-1999 Harley-Davidson Heritage FLST and FLSTC models.
Bestseller No. 2
Motion Pro 73.5 Armor Coat Clutch Cable Harley Davidson
  • Attractive stainless steel weave casing over coil wound housing
  • Clear Armor Coat cover protects chrome and painted surfaces
  • Premium chrome fittings
  • PE liner for durability and smoothness
  • Image is for reference only, actual product may vary
Bestseller No. 3
Hill Country Customs Stainless Braided +10" Clutch Cable for 1996-2006 Harley Touring models - HCC-67-0410
  • This is a High Quality Stainless Steel Braided Replacement Clutch Cable that is +10" longer than stock for adding taller Handlebars and Risers to your Harley.
  • Stainless Steel Braided Clutch Cables have a clear UV Resistant Armor Coat on the outside of the stainless steel braid to reduce fading from the Sun and to protect your paint from rubbing. Chrome plated ends provide the finishing touch.
  • Our Clutch Cables have a PTFE protective inner sleeve for an easier pull and provides longer life.
  • This clutch cable housing length is 72 11/16" long.
  • Fits 1996-2006 Harley Electra Glide, Ultra Classic, Street Glide, Road Glide and Road King models.
Bestseller No. 4
TARAZON 71" Braided Clutch cable for Harley Davidson Electra Glide,Super Glide,Street Glide,Road King,DYNA,Softail,Heritage,Fat boy,Fat Bob,Sportster
  • Fit for Harley Dyna / Fatboy / Heritage / Night Rod / Road King / Road Glide / Softail / Sportster
  • Length available with 55",59", 63",67",71",75",79",83",you can choose the length you like
  • We have PVC and Stainless Steel material for this clutch cable(this item is made of stainless steel)
  • smooth-working, durable and are made with the finest components available, making them virtually indestructible
  • High quality product, guaranteed to fit perfectly
Bestseller No. 5
Hill Country Customs Black Vinyl Coated +4" Clutch Cable for 2008-2013 Harley Touring models - HC-52-1437
  • This is a High Quality Black Vinyl Coated Steel Clutch Cable that is +4" longer than stock for adding taller Handlebars and Risers to your Harley.
  • The outer housing features a Black Vinyl coating that protects your Harley from rub marks and chrome plated ends to keep them looking good for a long time..
  • Our Motion Pro Clutch Cables have a protective inner sleeve for an easier pull and provide longer life.
  • This clutch cable housing length is 66 11/16" long.
  • Fits 2008-2013 Harley Electra Glide, Ultra Classic, Street Glide, Road Glide and Road King models.
Bestseller No. 6
Hill Country Customs Stainless Braided +6" Clutch Cable for 1993-2005 Harley-Davidson Dyna Wide Glide - HC-66-0262-FXDWG
  • This is a High Quality Stainless Steel Braided Replacement Clutch Cable for your Harley-Davidson.
  • Stainless Steel Braided Clutch Cables have a clear UV Resistant Armor Coat on the outside of the stainless steel braid to reduce fading from the Sun and to protect your paint from rubbing.
  • Clutch Cables have a protective inner sleeve for an easier pull and provide longer life.  Chrome plated ends provide the finishing touch.
  • This clutch cable housing length is 74 11/16" long.
  • Fits 1993-2005 Harley-Davidson Dyna Wide Glide Models.
Bestseller No. 8
HTTMT 14"-16" Ape Hanger Cable Brake Line Kit For Harley 2014-2020 Touring Road King Street Glide Electra Glide with ABS Model [P/N: HBA001-I]
  • 🏁 This custom kit is designed specifically to save you the tremendous time and hassle of figuring out what cable and line lengths you need for your handlebar
  • 🏁 Kits provides everything you'll need in one kit for a complete and proper installation on your specific motorcycle
  • 🏁 Each kit includes the correct length Clutch Cable,ABS Tri-Brake Kit with Chrome T, Fittings, and Banjos with Copper Crush Washers.
  • 🏁 Fittings are chrome plated; cables and lines are Stainless Steel and have a clear coated exterior which provides long lasting appearance and protects components from abrasion
  • 🏁 Harley 2014-2020 Touring w/ 14 in.-16 in. Handlebar ABS Model
Bestseller No. 9
Hill Country Customs Stainless Braided +8" Clutch Cable for 2008-2013 Harley Touring models - HC-52-1494
  • This is a High Quality Stainless Steel Braided Replacement Clutch Cable that is +8" longer than stock for adding taller Handlebars and Risers to your Harley.
  • Stainless Steel Braided Clutch Cables have a clear UV Resistant Armor Coat on the outside of the stainless steel braid to reduce fading from the Sun and to protect your paint from rubbing. Chrome plated ends provide the finishing touch.
  • Our Motion Pro Clutch Cables have a protective inner sleeve for an easier pull and provide longer life.
  • This clutch cable housing length is 70 15/16" long.
  • Fits 2008-2013 Harley Electra Glide, Ultra Classic, Street Glide, Road Glide and Road King models.
Bestseller No. 10
Motion Pro Armor Coat Steel Clutch Cable Compatible for Harley Davidson FLHRI Road King 1994-1999
  • Attractive Stainless Steel Weave Casing Over Coil Wound Housing
  • Clear Armor Coat Cover Protects Chrome And Painted Surfaces
  • Premium Chrome Fittings
  • Pe Liner For Durability And Smoothness
  • Image Is For Reference Only, Actual Product May Vary

Last update on 2022-05-12  / Images from Amazon Product Advertising API

About the author

Writer @ Motorcycleall.

Leave a Comment